| Home>Bearing knowledge>Cone bearing |
Radial bearing
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
It is primarily used for rolling bearings that accept radial loads; its nominal touch angle is between 0° and 45°; the fundamental parts are the inner ring, the outer ring and the roll with or without the cage.
2. Radial contact bearing
A centripetal rolling bearing with a nominal touch angle of 0°.
3. Angular contact radial bearing
A centripetal rolling bearing with a nominal touch angle greater than 0° to 45°.
4. Spherical bearing
Radial rolling bearing with outer spherical surface and wide inner ring with locking parts. It is mainly used for simple outer casing.
5. Tapered bore bearing
A centripetal rolling bearing with a tapered bore in the inner ring.
6. Flanged bearing
On one of its ferrules; usually a radial roller bearing with an outer radial flange on the outer ring or conical outer ring.
7. Roller bearing (rolling bearing)
a radial rolling bearing with a thick section outer ring; as a wheel tumbling on a rail; for example a cam track.
8. Retaining ring type roller (rolling) bearing yoke type track roller (rolling bearing)
Roller bearing with a pair of flat retaining rings.
9. Universal matching bearing
When you choose one or more sets of the same type of centripetal rolling bearings, you can get the characteristics of the paired or grouped devices.
Recommend to friends comments close window
| Bearing related knowledge |
| The reason why the ferrule of NSK one-way bearing is oscillating and the vibration damping method of the bearing formed by the bearing is discussed in detail. Ntn bearing disassembly and assembly protection method |
This article links to http://
Please indicate China Bearing Network http://
Previous:Installation and protection of rolling mill bearings (3)
Next: The bearing code type code indicates the method
Short Radius Elbow refers to that the radius of curvature is 1 times of the elbow pipe diameter,also referred to as 1D.
Elbow push hot forming process is the use of special elbow pushing machine, mandrel and the heating device, so that pushing pipe raw material to forward movement in the mold set, be heated in motion, expanding and bending forming process. Elbow push hot deformation characteristics of tube diameter is determined according to the law of constant volume before and after deformation of the metal material, use smaller diameter than the diameter of the elbow, through mandrel to control the deformation process of the blank, to other parts of the compensation due to thinning of the diameter expands, thereby obtaining a uniform wall thickness of the elbow.
| Product Name:Short Radius Elbow |
| Size:DN10-DN2500 |
| Materials: A234 WBP-WP1-WP12-WP11, A403 WP 304-304L-316-316L, A402 WPL3-WPL 6,A860 WPHY 42-46-52-60-65-70,PG370,C20 |
| Thickness: 2mm-100mm |
| Standard:GB/ANSI/ GOST/ JIS/ DIN |
| Crafts: Butt, Push System, Simmer |
| Connection: Welding |
| Package: Wooden boxes,Wooden pallets,According to customer requirements. |
| Brand Name: HY |
| Place of Origin: China (Mainland) |
| Certification: ISO.UKS.SGS.BV |
| Application: Chemical, Water, Oil and gas, Electricity |
Short Radius Elbow
Short Radius Elbow,Short Radius,Stainless Steel Short Radius Elbow,Pipe Elbow Radius
CANGZHOU HAOYUAN PIPE FITTINGS MFG CO.,LTD , https://www.pipefitting-china.com