Dust bag maintenance and replacement

Under normal circumstances, the dust bag is gradually worn, the main cause of wear is the grinding power of dust, high temperature caused by deterioration of the filter material and chemical corrosion, when the grinding power of dust is strong, the bottom of the bag wear the most serious , The system capacity increase caused by increased filtration speed can accelerate wear and tear. Dust collector can not use the damaged bag to work, otherwise it will speed up the scraper scrapped. When the individual bag small area damage occurs, you can use the old cloth bag or the same material new filter cloth to make up the use of holes, hole filling method is to use silicone rubber compound for bonding, as long as the adhesive temperature, chemical Performance and process conditions can be. When most of the bags are damaged, they should be replaced completely (when the filter is working for a long time, the fine dust accumulated in the filter layer will reduce its air permeability and affect the system air volume, but it should be replaced completely if it is not damaged) , Replace the bag is best to stop working when the precipitator, cleaning controller should be closed at this time, open the top of the manhole door, you can remove the bag, remove the bag cage first, and then the bag catchy Spring coil into a concave shape, pull out the bag up, install the new bag, the flower hole should be cleaned on the dust. Install the bag, dust skeleton method: the installation of cage and bag is the whole installation of the most careful and careful work, so should be placed at the end of the installation, installation, the bag must not be hit with the sharp objects, hooked even small Scratches, will also greatly shorten the life of the bag. The method of installing the bag is that the bag is put in the bag hole from the flower plate hole of the box first and then the spring ring in the upper part of the bag hole is pinched into a concave shape and put into the flower hole plate of the box body and then the spring ring is restored to make it Press tightly tightly around the circumference of the flower hole, and finally insert the bag cage gently from the pocket until the cover on the upper part of the cage does press against the flower hole in the box. In order to prevent trampled on the bag, each bag is required to install a bag cage. Such as replacement bag, the precipitator can not stop working, should be isolated off-line of each room, and then change the bag chamber compartment, the room should be isolated lift valve is closed, while the pulse valve does not work (to be safe, the Room pulse valve power off). When disassembling the bag, due to a small amount of negative pressure bag should be particularly careful not to drop the bag into the ash bucket.

Pull Out Faucets

The present invention provides a multifunctional pull faucet, comprising: a faucet body, a drawing part is provided at the water outlet port thereof, and the drawing part is connected to a main channel, wherein at least three are provided in the faucet body A branch channel, and the three branch channels are all connected to the main channel. A multifunctional pull faucet provided by the present invention, wherein the hot water channel, the cold water channel and the water purification channel (pure water channel) are all connected to the main channel , And the main channel is connected with the drawing part on the main body of the faucet, so that the drawing part can obtain the water quality (hot water, cold water, purified water or pure water) required by different users, thereby improving the user experience, and , By integrating the hot water channel, cold water channel and pure water channel (pure water channel) into the main channel, the internal structure of the faucet is simplified, and the production cost of the faucet is reduced.

Pull Out Faucets,Pull Out Kitchen Tap,Pull Out Sink Faucet,Standard Pull Out Faucet

Yuyao Zelin Sanitary Ware Co., Ltd , https://www.kitchen-sinkfaucets.com