Structural principle of welding special cooling circulating water tank

Welding dedicated cooling circulating water tank (also known as circulating cooler, circulating cooling water tank, water circulating cooling tank) purposes: welding cooling circulating water tank welding equipment for the welding heat generated by the failure to develop in time, it works for the welding equipment A good source of cooling water to solve the water supply equipment, welding difficulties. The circulating water tank, large capacity, fast cooling, to meet different welding equipment, welding machines and other water-cooled welder supporting requirements. In addition, this product can also be used for other electrical appliances, mechanical equipment cooling system, convenient and practical, welcomed by the majority of users! Scope: AC and DC TIG welding equipment, DC argon welding equipment, CO2 welding equipment, resistance welding equipment. Structure principle: The cooling water circulation tank structure design is reasonable, easy to use. Its working principle: cold water stored in the tank by the magnetic pump inhalation, through the water circulation system, and then to be cooled equipment, high temperature water outflow through the machine within the circulating radiator, radiator cooling fan exhaust heat so that the water temperature Lower, then return to the tank, re-enter the circulatory system, by some to achieve the purpose of cooling equipment. Circulating water tank machine has a small magnetic drive circulation pump, water circulation cooling device, cooling fan, water circulation system, a water outlet and a backwater connector, water level indicator and other components. Features: The use of closed stainless steel material, will never rust; magnetic seal pump design without the use of ordinary electric pump to avoid the scale generated for a long time, leading to block pump and burn out the fault.

Sand Pump

Product Introduction:

MG pump is including: Sand Pump, Dredge Pump , Sand Suction Pump, Coarse Sand Pump, Pulp And Paper Gravel Pump, Sugar Beet Handling Gravel Pump.

MG series gravel pumps are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. The advantages of the pump are easy installation and operation, good performance of NPSH and abrasion resistance.
Product Features:
-Single casing
-Wide wet-passage
-Wear resistant metal wet end part, long service life
-Discharge direction can be oriented at any degrees
-Good performance of NPSH
Application Range:

Size: 4 inch to 14 inch
Capacity: up to 4320 m3/h
Maximum head: up to 80m

Sand Pump,Sand Slurry Pump,Sand Treatment Slurry Pump,Corrosion Resistant Slurry Pumps

SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com