Heat pump technology market development

Heat pump technology has a long history, but as a new energy-based industries, heat pump into the Chinese market only three or four years, until now, the market has been tepid, in the country there is no large-scale promotion, but with the Energy tightening in recent years, especially the power shortage, heat pump market to inject new vitality, and in southern China, South Africa and other regions formed a heat pump economic belt. Heat pump market quietly warming. According to industry insiders, the next few years, Fujian's Sanming, Quanzhou, Xiamen market performed well, Fuzhou has great potential; Guangdong will become the main heat pump market competition; Hunan, Jiangxi and other markets have the most potential. With the promulgation of the Renewable Energy Law in 2006, the heat pump industry has also drawn more and more attention from all sectors of society. In southern China, central and southern provinces, it has become a prominent force in the world. Many brands are competing here and the sales are quite satisfactory. However, on the whole, the heat pump markets in Guangdong and Fujian in South China are obviously much more mature than those in other markets. Both the brand promotion and the consumer acceptance are relatively high. However, the markets in Hunan, Hubei, Jiangxi, etc. The province has developed rapidly in the past two years. Fujian market is good Fujian is located in the southeast coast of China, the territory of warm and humid, with an average annual temperature of 17 ℃ ~ 21 ℃, from climate conditions alone, the most appropriate heat pump to promote this product. However, due to heat pump is still a new product, the market is still in the incubation period, so despite the Fujian market has the conditions for the development of heat pump products, but due to the pre-market cultivation takes a long time, therefore, only Fujian, Sanming, Quanzhou, Xiamen Three relatively outstanding performance. At the same time, as the economic conditions in the three regions are better, the consumption standards and concepts are also ahead of others, the heat pump brands are more involved and the products are more well-publicized. Therefore, consumers have some understanding of this product and the market has been developing steadily for the past two years. Although Fuzhou is a capital city, economic conditions are not bad, but to open up market investment costs will also greatly increase. At the same time, because many heat pump manufacturers are relatively weak corporate strength, the basic lack of ability to promote a wide range, so the market acceptance of Fuzhou instead of Sanming, Quanzhou and other high. It is estimated that the next few years the potential of Fuzhou market will be relatively large. From the product analysis, Fujian market performance of the console is clearly stronger than the commercial aircraft. It is understood that the household appliances in Fujian market performed well, compared with last year, a conservative estimate this year there will be about 40% to 50% growth rate, the overall sales will be over 1000 units, and may even reach 2,000 units. Relative to the domestic machine, commercial machine currently in the performance of the market in Fujian is not good, some large hotels in the region such as the total reliability of the new product that is less reliable, therefore, is still more willing to use the traditional water heater. Guangdong Province, commercial aircraft play a leading role in Guangdong Province is located in the southern tip of the motherland, in the Pearl River Delta economic belt, economically developed, the average temperature in most parts of the province between 20 ℃ ~ 23 ℃. The favorable climatic conditions, high economic level and advanced consumer awareness have made Guangdong Province a benchmark city in the development of the past two years. Mainly in the following areas: First, many enterprises, brand everywhere, the product market widening. According to conservative estimates, only Guangdong local, with OEM manufacturers, including not less than 200; Second, brand promotion, consumer acceptance is high, many brands have set up offices in Guangzhou, but also because of the local brand more Thirdly, Guangdong has a prosperous economy. There are many large-scale events venues such as commercial enterprises, factories, staff dormitories, hotels and so on. Coupled with the water consumption habits of Cantonese people, small and medium-sized Heat pump commercial machine market is very hot. Conservative estimates, the market share of home machines will not exceed 5%. However, due to better marketing, the growth rate of the commercial aircraft market significantly accelerated.

Elevator Modernization

Elevator modernization (or lift modernisation) is the process of upgrading the critical parts of the elevator in order for it to be able to handle new technology, have better performance, improve safety, and even give the aesthetics an up-to-date appeal


Most elevators are built to provide about 20 years of service, as long as service intervals specified and periodic maintenance/inspections by the manufacturer are followed. As the elevator ages and equipment become increasingly difficult to find or replace, along with code changes and deteriorating ride performance, a complete overhaul of the elevator may be suggested to the building owners.

A typical modernization consists of controller equipment, electrical wiring and buttons, position indicators and direction arrows, hoist machines and motors (including door operators), and sometimes door hanger tracks. Rarely are car slings, rails, or other heavy structures changed. The cost of an elevator modernization can range greatly depending on which type of equipment is to be installed.

Modernization can greatly improve operational reliability by replacing mechanical relays and contacts with solid-state electronics. Ride quality can be improved by replacing motor-generator-based drive designs with Variable-Voltage, Variable Frequency (VVVF) drives, providing near-seamless acceleration and deceleration. Passenger safety is also improved by updating systems and equipment to conform to current codes.



Components needs to be replaced in different elevator modernization plan

Component Scheme of elevator modernization plan
Refurbishment work Partial modernization Full modernization Full replacement
Elevator car
Sling No No by building owners Yes
Door operator No by building owners Yes Yes
Cab design by building owners by building owners Yes Yes
Car doors by building owners by building owners Yes Yes
Car fixtures Yes by building owners Yes Yes
Wedges connected to the governor No No Yes Yes
Additional phone/intercom if they don't equipped by building owners Yes Yes Yes
Traveling cable No Yes Yes Yes
Hydraulic rams No No No Yes
Wire ropes No by building owners Yes Yes
Shaft
Counterweight No No No Yes
Guide rails No No No Yes
Buffers No No Yes Yes
Electrical components No No No Yes
Tapehead No Yes Yes Yes
Limit switches No Yes Yes Yes
Wiring No Yes Yes Yes
Compensations No No No Yes
Lobby
Shaft door components by building owners by building owners Yes Yes
Shaft doors by building owners by building owners by building owners Yes
Hall fixtures Yes by building owners Yes Yes
Machine room
Machines No by building owners Yes Yes
Controllers No Yes Yes Yes
Removal of the selector by building owners Yes Yes Yes
Overspeed governor No No Yes Yes
Additional unintended car movement protection device if they don't equipped by building owners by elevator safety code in countries
Backup battery or uninterruptible power supply No Yes Yes Yes




Benefits of elevator modernization

Modernization can greatly improve operational reliability by replacing mechanical relays and contacts with solid-state electronics. Ride quality can be improved by replacing motor-generator-based drive designs with Variable-Voltage, Variable Frequency (VVVF) drives, providing near-seamless acceleration and deceleration. Passenger safety is also improved by updating systems and equipment (such as double brake system, unintended car movement protection device on the brake system etc.) to conform to current codes.




With CEP traction elevator modernization, we use the existing elevator structure while upgrading the ride quality and reliability with state-of-the-art components. Upgrade to a CEP closed loop door operator or a sophisticated, energy saving VVVF inverter.

CEP traction elevator modernization can include:

  • CEP Microprocessor Based Control System
  • CEP Microprocessor Based Efficient Dispatch System
  • Energy Efficient AC Drives or SCR Drives on Existing AC Gearless Machines
  • Traction Machines (Geared / Gearless)
  • Rope Brake System
  • CEP Closed Loop Door Operating System
  • Car & Hall Pushbutton Fixtures & Indicators
  • Car & Counterweight Roller Guides
  • Seismic Upgrades
  • Security Upgrades
  • Cab Interior Renovations or Cab Replacement

NOTE: Complete tear-out modernizations are available.

Contact us TODAY for Right Modernization Package Available


OTIS Elevator Modernization, Thyssen Elevator Modernization, KONE Elevator Modernization, GiantKONE Elevator Modernization, ThyssenKrupp Elevator Modernization, Schindler Elevator Modernization, XJ Schindler Elevator Modernization, Xizi OTIS Elevator Modernization, Mitsubishi Elevator Modernization, Shanghai Mitsubishi Elevator Modernization, Fujitec Elevator Modernization, Hitachi Elevator Modernization, Toshiba Elevator Modernization, Hyundai Elevator Modernization, LG Elevator Modernization, Sigma Elevator Modernization, Express Elevator Modernization, GUANGRI Elevator Modernization, FUJI Elevator Modernization, BLT Elevator Modernization, CANNY Elevator Modernization, SJEC Elevator Modernization, KOYO Elevator Modernization, IFE Elevator Modernization

Elevator Modernization,Lift Modernisation,Passenger Lift Modernization,Passenger Elevator Modernization

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjelevatortravelingcable.com