Home>Bearing knowledge>Weak magnetic alarm method for rolling bearings |
Weak magnetic alarm method for rolling bearings
Source: China Bearing Network Time: 2013-01-14
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
When the bearing is out of fatigue, the falling metal debris flows into the magnetic collecting device of the alarm device with the smooth oil. It is piled down together; due to the magnetic effect of the magnetic ring; the metal scrap is firmly sucked in the taper sleeve Inside the gap between the valve and the cone valve; the signal circuit is turned on in the gap via the metal chips; the light signal or the acoustic signal is declared to act as a fatigue alarm.
There is a tightening nut under the magnetic chip collector; the nut can be removed to remove the chip collector; to know the working condition of the bearing at any time; to view or replace the chip collector. When removing the chip collector; the upper shut-off valve is Under the effect of the spring, the matching taper surface of the large ring is pressed; the smooth oil is not; the leakage is caused; therefore, the dust collector can be replaced or viewed in the condition of no parking; or the bearing condition can be monitored.
Recommend to friends comments close window
Bearing related knowledge |
What is the clearance and how to measure the clearance of the rolling bearing? NTN bearing conflicts and temperature rises are caused by imported bearings, rebellion specifications, common pain, bearing anomalies, bearing use in coal mine occupations |
This article links to http://
Please indicate the bearing network http://
Previous:Correction of Camshaft Cracking of Type B135 Diesel Engine B-Type Fuel Injection Pump Next: Bearing Professor Describes Bearing Clearance, Inspection and Discrimination
Interior Led Lights,Led Indoor Lighting,Indoor Flood Lights,Indoor Decorative Lights
B-F-B-ic international Ltd.co , https://www.ledgather.com