The pursuit of personality should be based on the actual
King said that many people nowadays blindly pursue individuality and only consider personal preferences to ignore family life habits. This blindness has forgotten the significance of the furniture itself and is not comfortable to use. Some people ignore the actual conditions of the house. Furniture made according to the magazine's style is very crowded at home. This is because consumers are not professional enough and confident enough.
Before customizing furniture, there are several factors to consider: 1. The number and condition of family members. If the house has a limited area but a slightly larger population, the furniture should be simple in shape and have a relatively small size.
2, furniture style and decoration style consistent. What style of furniture should be determined before the renovation.
3. Make a reasonable budget. Manufacturers with relatively low asking prices or bargaining prices are not to be considered. Some individual workshops, due to the large number of low-quality materials used, the prices of furniture are relatively cheap, and they can often be priced at thousands of yuan. Be careful with this kind of seemingly cheap furniture. You may not see anything wrong on the surface. After a period of time, you can realize the principle of "a penny and a piece of goods." Therefore, according to their own actual needs in the previous period, it is necessary to do a full market survey. The budget can be reasonable in the custom-made market. We must know that good materials are not cheap.
4. Use the budget for "blade". Mainly based on their own living habits and occupations, to determine what is the necessary furniture, which is not available or the use rate is very low. For example, study furniture, if you do not have a book, usually do not take work home, then the home does not need a study, at most need to find a place to place a computer.
It is very important for manufacturers to listen to and see more custom-made furniture. It is possible to select good reputation manufacturers through the introduction of some people in the online forum. In addition, there are now some well-established manufacturers behind furniture designers that are independent, and they are a good choice for young people who like originality. They can not only listen to the opinions of professionals, but also can communicate with the designers through their own Personalized furniture.
Before determining the manufacturer, they must go to their factory or showroom to see the samples, and carefully observe the details of the samples, whether the joints are tight, whether the paint is uniform, whether the interior materials of the furniture are smooth and so on. The so-called details of the place to see kung fu, deal with the details of the manufacturers will pay attention to product quality.
The contents of the contract include drawings and custom-made furniture. It is necessary not only to sign a custom contract with the factory, but also to confirm the design of the contract by more than one purchase of finished furniture. After a custom agreement has been reached, the merchant will give the consumer the design and renderings of the furniture design. The sheet, substrate, color and size of the furniture shall be clearly marked on the drawings. These drawings are also part of the contract. Contracts Should be noted. In addition, the contents of the contract should include detailed descriptions of important terms such as product quality, usage methods, environmental protection requirements, delivery deadlines, and liability for breach of contract. Consumers should read it carefully and consult the manufacturers wherever they encounter ambiguity. Late disputes.
The inspection process should not be neglected. After the furniture is completed, it must go to the manufacturer to inspect the goods and determine the correct use of various materials. During the inspection, reach out to the place where the eyes inside the furniture are hard to see, whether it is smooth and smooth, knock to hear whether the sound is thick, measure the size of the furniture, avoid “short of the shortsâ€; open the door smell the smell, the smell is tears If this is the case, it means that the formaldehyde is exceeding the standard. In addition, furniture hardware accessories is also an important manifestation of the quality of furniture, hardware finishes and flexibility can be seen when the inspection, wear resistance will need to be tested through the use of the future. In the end, we must remind you that you must leave a balance (about 30%) after the inspection to ensure that there are no problems.
Furniture Catchy Small apartment Renovation Apartment Renovation Furniture Renovation Design Style Renovation Paint House Renovation House Renovation Drawings House Renovation Renderings Renovation Style Cabinet Doors Study Furniture Study Drawings
Sectional Door Accessories: motor 220V-380V, control box, spring break device, cable break device , aluminum alloy rope pulley, enhanced shaft bracket, air bag system, duplex enhanced guide wheel bracket.
Detail introduction for above main accessories
1.Motor and controller:
The garage door operator is designed for residential overhead sectional and tilt doors.
The operator memorizes the limit positions and unique braking system that slows the unit down at the end of its travel.
Rolling code remote control with max. 20 pcs hand transmitters.
The operator is equipped with a manual release lever which allows manual operation of the door in case of power failure.
The controller has a security LOCK function which prevents operation of the door from transmitter.
2.spring break device:
Sectional doors are hinged and they bend in the tracks as the door opens and closes. Many of these doors are counterbalanced with extension springs, also designated "stretch springs," and they have seven characteristics. The length is the measurement of all the coils pressed together. This, along with the inside diameter of the coils and wire size - the thickness of the wire from which the springs are made - determine the stretch, the distance the spring is extended - normally half the door height, and pull, the force the spring pulls when stretched its normal length. The type of ends determine how the ends of the spring are mounted. The initial tension is the percentage of pull needed to separate the coils. This is determined by the pitch with which the springs are wound. On sectional garage door springs this is normally 15 percent. For example a 100 pound pull spring requires 15 pounds of weight to separate the coils; when a door is open the two springs will support 15 pounds of door weight without any stretch.
Most extension springs are made of oil tempered wire. These are normally coated or painted. Some springs are made of galvanized wire.
3.able break device:
cable break device ,door hardware
adjustable bottom bracket .
the raw material hot plate
zinc plated
safety device
adjustable bottom bracket
the raw material hot plate
zinc plating
spring safety device ,2" and 3" safety device
once the cable is broken ,this devoice can keep the hurt away from the door falling
4.aluminum alloy rope pulley
Equipment: CNC stamping/punching machine, CNC bending machine, CNC cutting
machine, 5~250 tons punching machines, welding machine, polish machines...
Processed material: stainless steel: copper, carbon steel
Surface treatment: Hot galvanized, polishing
Making process:Stamping, deep drawing,bending, punching, laser cutting,threading,
welding, tapping, riveting, grinding
5.air bag system
It is a safety device. When the door is down to hit something, it will up automatically.
Operation pressure:<3mbar
Battery:CR2032*2
Battery lifetime>1 year
Emission frequency: 315MHZ
Emission power:<10mW
Receiver power source:12V
6.duplex enhanced guide wheel bracket
Determining the right type of sectional door roller for your garage door tracks can be a little confusing, especially when you do not know what you need to look for in a garage door roller. To simplify things, there are two primary things you need to be aware of. First are the actual dimensions of the roller, and second is purpose that you will be using the door for. You can read below about measuring your roller and choosing the right quality of material for your door.
Other Door Accessories,Electronic Door Accessories,Automatic Door Accessories,High Speed Door Radar Detector
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfgaragedoor.com