There are many ways to express steel bars. The steel bars used in different constructions will not be the same. Generally, the number of steel bars, diameters, and grades should be taken into account when marking steel bars. There are center distances, etc. There are Class I steel bars, Grade II steel bars, Grade III steel bars, Grade IV steel bars, Grade V steel bars and so on. However, there is no bar symbol in the input method. Is there any way to download the steel symbol ? How to input the steel symbol? Here we have a look at the introduction of the relevant information of the steel symbol download and hope to help everyone.
Rebar symbol download method:
Download "SJQY" font, after the download is complete, the installation method is very simple, first copy the font above, and then paste it to the appropriate location to complete the installation!
After the installation is complete, the next step is to enter the letters and combine the fonts to get the reinforcement symbol; for example, in Word, we first input the uppercase ABCDE and select it, and finally find the drop-down list box to set the font, select "SJQY "Fonts, as shown below:
How to enter the steel symbol:
According to the mechanical properties of steel bars, they are mainly divided into first-level steel bars, second-level steel bars, and third-level steel bars. The most commonly used ones are these three types of steel bars. Here are the symbols for the three kinds of bars in word and excel. How to enter.
Level 1 reinforcement symbol: Enter E000, select E001 (black) and press ALT+X to change;
Secondary steel symbol: input E001, select E002 (black) and press ALT+X to change;
Three-level steel bar symbol: input E002, select E003 (black) and press ALT+X to change;
Level 1, level 2 and level 3 symbols are as follows:
General steel symbol representation:
Stirrups:
Symbol meaning
Φ10@100/200(2) indicates that the stirrup is φ10, the space between the encryption area is 100, and the space between the non-encrypted area is 200, which is all two-armed
Φ10@100/200(4) indicates that the stirrup is φ10, the space between the encryption area is 100, and the space between the non-encrypted area is 200.
Φ8@200(2) indicates that the stirrup is φ8, the spacing is 200, and the two limbs are hooped
Φ8@100(4)/150(2) indicates that the stirrup is φ8, the spacing between the encryption areas is 100, the limbs are hooped, the non-encrypted area is at a distance of 150, and the two limbs are hooped
Beam upper and lower ribs:
Symbol meaning
3Φ22,3Φ20 means that the upper bar is 3Φ22 and the lower bar is 3Φ20
2φ12,3Φ18 means that the upper bar is 2φ12 and the lower bar is 3Φ18
4Φ25, 4Φ25 means that the upper bar is 4Φ25 and the lower bar is 4Φ25.
3Φ25,5Φ25 means 3Φ25 for the upper bar and 5Φ25 for the lower bar.
Beam upper ribs:
Symbol meaning
2Φ20 represents two Φ20 rebars, long and arranged for use on both limbs
2Φ22+(4Φ12) means that 2Φ22 is a long length, 4φ12 stand bars for the six limbs hoop
6Φ25 4/2 means that the upper bar is 4Φ25, and the lower bar is 2Φ25.
2Φ22+ 2Φ22 means that there is only one row of steel bars, two at the corners, and two in the middle, evenly arranged
Liang Yaozhong tendons:
Symbol meaning
G2φ12 represents the structural reinforcement on both sides of the beam, one φ12 on each side
G4Φ14 represents the structural reinforcement on both sides of the beam, two Φ14 on each side
N2Φ22 represents torsion reinforcement on both sides of the beam, one Φ22 per side
N4Φ18 indicates the torsion reinforcement on both sides of the beam with two Φ18 on each side
Editor's summary: The knowledge about the steel bar symbol is introduced here for everyone. The steel bar is widely used in our daily life. In order to facilitate everyone to understand more steel bar symbol knowledge, follow-up will continue to present more exciting content. I hope you can continue to pay attention to our website! (Information above is for reference only)
Curtain installation method
Impeller normally applied in the centrifugal pumps.
Impeller is a rotating component equipped in the Pump Housing, help to transfer to energy from the motor that drives the pump to the fluid being pumped by accelerating the fluid outwards from the center of rotation.
QFAP supply various kinds of impellers to all over the world, main of our customers are from Europe, North America, Japan and Southeast of Asia.
Materials: grey Iron, ductile iron, steel castings, aluminum die castings, etc.
Surface treatment: painting, zinc plating, passivation, nickel plating, anodizing, polishing, etc.
Heat treatment: according to customer`s requirement.
QFAP have specialized in producing high precision Agriculture Parts more than 10years, Because of the long term cooperation, we could supply our customers not only the products but also our recommendation on the designs to saving costs.
Boat Impeller,Fan Impeller,Oil Pump Impeller,Blower Impeller
SHAOXING QIFENG AUTO PARTS CO., LTD. , https://www.sxqfap.com