The rise of home burglary

With the continuous improvement of people's living standards, people's needs for home security are on the agenda. The home security system can play an effective role in protecting the common crimes such as house building, theft prevention, reducing the destruction of public property and burglary, and can even use it to reduce accidents that occur indoors. The door magnetic technology is one of the most important burglar alarm methods!

The rise of home burglary

The average family’s past security awareness is weak. Many people think that the community’s security is regularly patrolled, home security doors are equipped, natural security protection is guaranteed, and no anti-theft alarm equipment is installed at home. In the past two years, people’s concerns and concerns about their own security issues have grown. Many families have installed anti-theft nets to protect the safety of people and property. However, such traditional physical protection systems have encountered various drawbacks in practical applications. For example, they have impacted the city's environment, suddenly encountered disasters and prevented escape, and provided criminals with Overcoming conditions and many other unfavorable factors.

Dozens of cities have now enacted legislation to forcibly remove metal anti-theft nets; in addition, many shops, warehouses, villas, and hotels are scattered, and it is sometimes difficult to supervise human resources, and security accidents such as thefts often occur. How to prevent it from happening and do a good job of prevention in advance has become the focus of social attention, and it also provides a broad space for the development of high-tech intelligent anti-theft alarm systems.

Wireless door magnet installation method

When doing the anti-theft work, the most important and most important precaution is the security of the door. Then install a burglar alarm. The detectors we use above the door use at most the door magnet, which is used to trigger the opening and closing of the door. Call the police. What are the installation methods and precautions for wireless door magnets?

The key components of the door magnet are the induction reed pipe and the magnet. The door magnetism works by using the principle that the magnet can control the opening and closing of the reed switch. When the two are close together, the reed switch is closed, if the two The reed switch will be disconnected and the disconnection signal will trigger the RF circuit to send a wireless alarm signal to the control panel. The wireless door magnet is installed on the active door and window, so when the door and window are opened, the alarm of the alarm is triggered. When installing, it is necessary to clean the corresponding positions of the door and the window first, and use double-sided adhesive to secure it; or remove the cover plates of the magnetic detectors A and B of the doors and windows, fix them with screws, fix them with screws, and then install the boards.

Door and window magnetic detector installation should pay attention to: wireless door magnetic detector A (transmitter) and wireless door magnetic detector B (magnet) should be installed separately, that is, the transmitter is installed on a fixed door frame or window frame, and the magnet should be installed In the active windows and doors. Magnets and emitters are aligned up and down. The distance between the two should not exceed 10 mm. The magnet should be installed on the test lamp. For the best wireless transmission distance, pull the antenna out and in the vertical direction. The other detectors are the same. There are 2 LED lights on the magnetic door. When one light is on, it indicates that the battery power is insufficient. Please replace the battery in time.

Finally, we remind everyone that the gate magnetism used by different doors is different. For example, we should use iron gate magnets for iron gates. Because the magnetism of iron gates is very strong, it is suitable for mounting on large iron gates, and many Users will magnetically mount ordinary doors on the iron gates. This is wrong. The roller shutter is different from other doors. For the convenience of installation, we should use the roller shutter magnet, the magnetic and pressure resistance of the shutter gate, and the special purpose of the roller shutter. When installing, the sensor head is embedded in the ground directly below the roller shutter door and the magnet is mounted on it. On the roll gate, aligned with the sensor head, the transmitter can be mounted on the wall.