For chemical equipment, the reaction equipment is familiar to everyone, and it can be understood literally: it is a machine for material reaction, and the more commonly used reactors.
The structure of the general reactor is divided into a tank body, a head, a motor, a stirring device, a foot, and the like. The stirring device of the reaction kettle is the main device for material mixing, so the choice of the agitator in daily production is very important.
The stirring device of the general reactor can be divided into: paddle type, toothed type, anchor type, frame type, ribbon type screw type, turbine type (bending leaf, folding, straight leaf, push type), Bruma gold type and many more. The most commonly used one is the paddle mixer. Among the many stirring devices in the reaction kettle, the paddle agitator has the simplest structure. The whole blade is made of flat steel. The joint is welded or bolted to the hub. The number of blades is generally 2, 3 or 4 pieces. Generally, it can be divided into two types of flat leaves and folded leaves. According to the shape characteristics of the blades, the paddle type agitator can be divided into a flat paddle agitator and a tilt paddle agitator.
The flat paddle mixer produces a radial force that generally runs slower. About Zfl - 80r / min. Mixing occurs in the radial direction, and no good agitation occurs in the vertical direction . However, due to its simple structure, it is widely used to promote the mixing operation of heat transfer, mixing and dissolution of soluble solids.
Helical paddle stirrer axial force is generated, whereby the agitator blades can become 24 °, 45 ° or 60 ° angle, with an axial split, radially split flow airfoil complex than a paddle straight discharged The energy is higher than that of the straight paddle, the comprehensive effect is better, and the applicable process is the same. Therefore, the application frequency is higher than that of the straight blade paddle, and the operating condition is the same as the straight blade paddle type.
Therefore, when the reactor agitator is configured as a paddle type, it is generally suitable for a low viscosity liquid, and the suspension and the solution are stirred. Like high viscosity materials it is not recommended reactor configured as a paddle-type stirring device.
Single Acting Hydraulic Cylinder
A single acting hydraulic cylinder is a type of hydraulic cylinder that uses hydraulic pressure to move in one direction only. It is designed to extend or retract under pressure from one side only, using a piston and rod assembly. The cylinder is usually mounted in a fixed position and the force is applied to the piston rod to move the load. Single acting hydraulic cylinders are commonly used in applications where the load needs to be raised or lowered, such as in dump trucks, construction equipment, and agricultural machinery. They are also used in industrial applications where precise control is required, such as in metalworking and material handling equipment.
Single Acting Hydraulic Cylinder,Hydraulic Cylinder,Aluminum Jack Cylinder,Double Acting Hydraulic Jack
Yantai Dongyue Hydraulic Technology Co., Ltd , https://www.deeleap.com