Liu Ming, the Institute of Microelectronics of the Chinese Academy of Sciences, made new progress in the research of 1Mb 28nm embedded resistive memory test chips and 8-layer stacked high-density three-dimensional resistive memory arrays.
The new memory represented by RRAM and MRAM is considered to be the main solution for embedded storage in 28nm and subsequent process nodes. Liu Ming's team has accumulated 10 years of research and accumulation in RRAM direction. In 2015, he began to unite SMIC and Guoji Zhixin and other units, and jointly promoted the practical use of RRAM in cooperation with production, education, and research. After more than two years of hard work, the development and verification of the process flow was completed on SMIC's 28nm platform, and on this basis, a test chip with a scale of 1Mb was designed and implemented.
The high-density three-dimensional cross array with vertical structure combines the advantages of the 3D-Xpoint and 3D-NAND architectures, and has the advantages of simple preparation process, low cost, and high integration density. Liu Ming team realized the 8-layer structure design on the basis of the previous four-layer stack structure (IEDM 2015 10.2, VLSI 2016 8.4), and further verified the possibility of the RRAM three-dimensional structure shrinking to less than 5nm.
Related research results are BEOL Based RRAM with One Extra-mask for Low Cost, Highly Reliable Embedded Application in 28 nm Node and Beyond, and 8-Layers 3D Vertical RRAM with Excellent Scalability towards Storage Class Memory Applications. A report was made at the conference.
(a) 28nm RRAM 1Mb chip layout; (b) 28nm RRAM cell TEM interface
8-layer stacked RRAM cross-section
Stainless Steel Sanitary ASTM A270 Stainless Steel Tubes is the main tubing line for a piping system. Generally, ASTM A270 Stainless Steel Tubes are made in stainless steel 304 and 316l, but we provide other grade too such as hastelloy C22, 316Ti, Titanium and nickel alloy etc. Kaysen offer both sanitary seamless tubes and Sanitary Welded Tubes to ASTM A270, ASTM A249, A269, ASTM A554, DIN11850, and size is up to 12″. Inner and outer surface is polished to meet the high purity requirement of hygienic industries. Kaysen is ability to supplying qualified ASTM A270 Stainless Steel Tubes comply to your your condition and FDA,GMP requirement.
ASTM A270 Stainless Steel Tubes - Sanitary Tubing
Material: SS304, SS316L, EN 1.4301, EN 1.4404, etc
OD diameter: 1/2" - 12"
Thickness: 0.5mm - 6mm
Standard: ASTM, JIS, DIN, JIS, SUS, GB
Length: 6m or customer made
Tolerance: OD. ±0.2mm; Thickness: ±0.02mm; Length: ±0.5mm
Surface Treatment: Matt Finish or Mirror Finish (320# 400# 600#) etc
Application: Boiler, heat exchanger, construction, hygienic, pharmacy, power, petrochemical
Strength:
Heat Treatment of solution annealing for the sanitary tubings and fittings are available
High precision on dimension and wall thickness
Both seamless and welded sanitary tubings are available
Length is up to 12 meters.
Min. order quantity of sanitary tubings is from 300Kgs.
Offer industrial pipe and tubes according to order.
PMI test to verify material grade.
Visual and surface 100% examination before shipment.
End protected for shipment.
ASTM A270 Sanitary Tubes,A270 Stainless Steel Pipes,SS304 Sanitary Tubes
Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com