In home decoration, tile is a link that owners need to pay close attention to. However, the ability to tiling on a plasterboard can be a headache. Today we will come together to understand that it is not suitable for plasterboards on partition walls to be tiled together, and how to tile floors quickly and well!
First, plasterboard can be tile it ?
1. It goes without saying that the stability of the tiles after plastering on the gypsum board will be very poor. At the same time, it will be greatly influenced by the environment and time, and the possibility of final deformation will be great. In fact, this problem is the biggest problem in plastering plasterboards. So, if you want to put tiles on the plasterboard, check the firmness of the plasterboard before construction.
2. Can a plasterboard be tiled ? According to expert analysis, if everyone's conditions permit, it is best not to plaster tiles directly on gypsum board mountain. You can first add a layer of wood to the surface of the gypsum board, and then put the tiles on the deck, which can effectively reduce the deformation of the gypsum board. The resulting tile shedding problem.
3. Finally, if possible, owners are advised not to tile the plasterboard. If it does not work, it must be handled properly. You can attach a cement pressure plate or other stable material outside the gypsum board wall, and do not lay too heavy tiles, because it will increase the burden on the gypsum board, and ultimately reduce its service life.
Second, how to quickly and better?
Tile soaking
Everyone must first clean up the tiles they bought and soak them for more than two hours. Its main purpose is to allow the tile to absorb moisture while preventing it from absorbing moisture from other materials after being laid, resulting in a lack of agent moisture and affecting its firmness. Eventually it will cause hollowing and falling off.
2. Set the auxiliary line, support board
Before starting to lay tiles, it is necessary to find the vertical line on the flat wall on the wall. Its main purpose is to determine the line size of the tiles. The next step is to set the horizontal line, and then use the horizontal line as the criterion to set the board that can support the tiles.
3. Laid out in order
Paving tiles are generally started from the balcony and then pressed up and down, in the order of left and right. The specific paving method is: After the water leveling layer is used, the mortar is applied to the back of the tile, and then the tile is attached to the wall. Then just tap the tile with a rubber hammer and let the mortar fill the space between the wall and the tile.
Conclusion of the article: The above has given you a glimpse of the fact that plasterboards can be tiled , and how the paving tiles are quick and good , and hopefully we can give you some help. We need to pay attention to the fact that when the tile is well-laid, it must be cleaned in time to avoid affecting the overall aesthetic level!
Gate Valves,Knife Gate Valves,Types Of Gate Valves,Gate Valves Brass
AS-SUR INDUSTRIAL VALVE CO., LTD. , https://www.assur-valve.com