According to the survey, about 55% of the owners prefer to use wood flooring when they are in their homes, because it is not only environmentally friendly and comfortable, but also has beautiful and fashionable effects. Therefore, it is deeply favored and favored by the owners. However, many owners do not understand the paving knowledge of wood flooring very well. Therefore, they have caused a lot of trouble. For example, do you want to vacuum the floor before laying the floor ? Let's take a closer look at the following: How do you clean the floor before laying the floor and how to lay the floor? Hope you can help.
Do you want to vacuum the floor before laying the floor?
Is it necessary to vacuum the floor before laying the floor ? First of all, the answer is yes. There will be a lot of dust and impurities on the ground. If it is not removed, the floor will not be smooth enough after being laid on the floor, and it will easily bulge and paint off. Therefore, you must first use a vacuum cleaner to clean or wash with clean water, etc., can be completely clean before paving.
How to lay wood floors:
1, the floor should be the last paving, can not cross construction with other projects. In addition, it should be polished and painted as soon as possible after laying so as to avoid soiling or moisture deformation of the floor.
2. Before starting, we must first open the product and open it on the site for 2 days, and wait for it to gradually adapt before paving, so as to avoid the expansion and contraction after laying.
3, before the start, we must prepare for moisture, especially where the bottom is more humid, be sure to apply moisture-proof paint or put moisture-proof film and other products.
4, keel should be flat, to be stable, not cement reinforcement, but to use expansion bolts, the United States to strengthen the nail.
5, the keel is best to larch, Liuan as the main material, the moisture content of the keel to be close to the floor moisture content. In addition, the distance between the keels must not be too large, not more than 30 cm. And both ends of the floor should be fixed on the keel, not empty, and then nailed.
6, the floor can not be too tight, leaving 0.5 to 1.2 cm around the gap. In addition, it must not be laid wide. If the venue is relatively wide, it must be separated and cut, and then copper bars should be pressed.
7, the junction between the floor to do isolation moisture treatment.
8, the floor has a certain color, if there are special requirements of friends, we must first do a good job of sorting, and then take a gradual transition approach to paving, to reduce the visual sense of sudden change.
9, in the maintenance, can not be washed with water, nor exposure, but not contact with hard objects, so as not to leave scratches, affecting the overall appearance of the home.
The article concludes: How to vacuum the flooring before laying the floor and how to lay the wood floor is introduced here. In fact, the laying method of the wooden floor is very simple. Just follow the above steps, but before laying, it must be Clean the floor to avoid protruding and paint off.
Led Spot Light,Downlight Spot Light,Spot Light Aluminum,Store Spot Light
JIANGMEN MICHEN LIGHTING CO.,LTD , https://www.jmledbulb.com