Mobil high-temperature greases are excellent anti-wear greases for high performance applications. However, there are still many people who are not very familiar with Mobil high-temperature grease. The following Xiaobian has come to tell you about Mobil high-temperature grease product characteristics, application and identification methods.
Mobil High Temperature Grease Product Features
1, excellent high temperature and low temperature performance.
2, excellent oxidation resistance, maintain the structure of grease at high temperatures.
3, low traction coefficient.
4, excellent low temperature pumpability.
5, very good anti-wear protection.
Mobil High Temperature Grease Application
1. MobiltempSHC series is suitable for high speed bearings and thrust bearings that work in a wide temperature range.
2. Especially suitable for motor motor bearings requiring low friction, low wear and long service life.
3, in the extreme temperature conditions of application, recommended operating temperature range of -50 °C to 200 °C (at the appropriate fatliquoring cycle).
Mobil High Temperature Grease Identification Method
1, oil flow observation method
Take two measuring cups, one of which is the Mobil high-temperature grease series to be inspected. The other is placed on the tabletop. Raise the cup full of Mobil lubricants 30 to 40 cm from the tabletop and tilt it so that the oil flows slowly to In the empty glass, observe the flow. When the oil flow with good quality, it should be slender, even and continuous. If the oil flow appears suddenly, sometimes there is a large flow, then the oil has deteriorated.
2, hand rub method
Repeated grinding of Mobil's high-temperature grease series between thumb and forefinger, better lubricator feels lubricity, less swarf, no friction, if you feel the large friction between the fingers like sand, then It indicates that there are many impurities in the lubricant and can no longer be used. Replace the new lubricant.
3, light law
On a sunny day, use a screwdriver to pick up the Mobil high-temperature grease series at a 45-degree angle from the horizontal plane. With the sunlight, the oil droplets were observed. Under light, it was clearly seen that no flaking in the lubricating oil was good and could continue to function. If the wear debris was excessive, the lubricating oil should be replaced.
4, oil drop mark method
Take a clean white filter paper, a few drops of oil on the filter paper. After the oil leaks, if there is black powder on the surface, there will be a sense of resistance and astringent touch, which means that there are many impurities in the oil. Lubricants are powder-free, dry and smooth by hand, and have yellow marks
After reading the contents of the above article, everyone should now understand the relevant knowledge of Mobil high-temperature grease products. I hope the above content can help everyone.
The Emergency Sensor Light is specially designed for ceiling Mounted emergency lighting and with Microwave Sensor. from 12inch 18W to 18inch 36W. Dimmable lighting, Waterproof and Dustproof avialable. Widely using for Office and Household. Automatically light at once when buildings main power outage. It is more than 3 hours emergency time. When Main power is on, it use as an normal sensor lighting
Led Emergency Sensor Light,Emergency Light Sensor,Microwave Sensor Emergency Light,Emergency Sensor Light
Foshan Nai An Lighting Electric Co.,ltd , https://www.emballast.com