1) Small and medium-sized steel, wire rod, steel bar, medium-diameter Steel Pipe, steel wire and steel wire rope, etc., can be stored in a well-ventilated shed, but must be placed on the underside.
2) Some small steel, thin steel, steel, silicon steel, small-diameter or thin-walled steel pipes, various cold-rolled and cold-drawn steels, and high-priced, corrosive metal products can be stored in the warehouse.
3) The site or warehouse where the spiral steel pipe products are kept should be cleaned and drained, away from the factories and mines that generate harmful gases or dust. Remove weeds and all debris from the site to keep the steel clean.
4) Large-scale steel, rail, insult steel plate, large-diameter steel pipe, forgings, etc. can be stacked in the open air.
5) Do not stack materials that are corrosive to steel, such as acid, alkali, salt or cement, in the warehouse. Different types of steel should be stacked separately to prevent confusion and prevent contact corrosion.
The Channel girder is a cost-effective solution for short to medium span structures. The top deck can be manufactured with a variety of traction profiles, eliminating the need for field applied wearing surfaces. Standard Channel Beam sizes are listed below in 20", 24", 28", 32" and 36" depths, but custom sizes and adaptations such as extended flanges or 2nd cast curbs are easily attainable. While the Channel Beam section was originally developed for bridges, it is also popular for marine pier, building and garage applications.
Channel Girder,Channel Girder Mould,Double Overhead Mould,Precast Channel Girder
Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com