2, aluminum alloy floor mat has a good anti-slip, dust, fire-retardant, anti-aging, high temperature, repeated use and other advantages
3, aluminum alloy mat is an ideal drainage type, non-slip function of the safety mat;
4. Aluminum alloy mats are mainly made of 6063-T5 aluminum alloy profiles with corrosion resistance in conformity with the national standard and high-strength twists of single fibers and synthetic fibers. Because the dust-removing blanket surface fibers are carbonized, they are scraped and hidden. Hygroscopicity has a super advantage.
5, aluminum alloy floor mat consists of a single piece, according to the requirements of any placement, installation, in line with the national standard mat products have good resistance to pressure and easy to clean. The bottom is made of pvc or EPDM material, which can be close to the ground and difficult to slide, so as to achieve a safe and comfortable effect.
6, aluminum alloy floor mat has a good dust anti-slip function, the combination of multiple materials can extend the life of the mat, but also better play a dual effect of dust, product color diversity and design flexibility to determine the product The decorative performance also avoids the friction between the sandy dirt and the ground, protects the surface smoothness of the ground stone, and the carpet surface and rubber damage can be replaced separately, thereby reducing maintenance costs.
Edit this paragraph specifications and characteristics of aluminum alloy floor mats with corrosion resistant aluminum alloy 6063-T5, wall thickness of 1.6mm-4mm, with a total thickness of 22mm, the bearing capacity under the standard rolling up to 1500kg-4000kg /? No deformation, strong endurance, not easily deformed.
One of the fabrics: rubber, the use of "thermoplastic rubber", can be high temperature 140 degrees, low temperature -70 degrees, not easily deformed, non-irritating odor.
The second fabric: the carpet is made of European LOMBOKGEL, VEBE, BERRY GROUP, 3M nylon PA6.6 or polypropylene yarn and loop pile.
Height: about 10 mm
Color fastness: water (ISO105E02/BS 1006)
Friction series dry or wet (ISO 105×12/BS 1006)
Electrostatic: EN1815/ISO TR 6356/DD68<2KV Edit this paragraph Advantages of flame retardancy: Class B1 (UK radiation test: BS476)
Color: The dyeing process of fabrics adopts liquid dyeing methods. The fabrics are rich in color and can be flexibly matched according to customer needs.
Accessories: The lock is Sus304 stainless steel lock, steel wire is a special treatment of anti-rust plastic coated steel wire aluminum alloy dust mat as an important part of the entrance system, the floor mats all use polypropylene or imported nylon 66 professional dust mat, its fiber passes Carbonization treatment is unmatched by other mats in terms of decontamination and moisture absorption. And has anti-ultraviolet, anti-static and other characteristics. It can also provide rubber surface layer and emery anti-slip decontamination surface layer according to customer requirements. At the same time, maintenance costs can also be reduced during use.
Aluminum alloy floor mats, corrosion-resistant aluminum-magnesium alloy frame, wall thickness of 1.5mm, floor mat height of 20.0mm, its bearing weight up to 1000kg/m2 under standard rolling without deformation, surface alkalized, anodized, High temperature treatment, will not rust and deform due to wet ground.
Edit this paragraph aluminum alloy mat type 1, stainless steel wire rope connected
2, interlocking editor of this section of the laying method of floor mats 1, in the laying of floor mats, in the construction of the ground need to be pre-positioned around the length and width of the mat, and the depth of 22mm groove.
2. When laying the floor mats, the inner bottom of the grooves needs to be leveled with cement. After the cement is completely solidified, the floor mats are placed in the grooves, and the aluminum alloy trim strips are selected according to the needs of the internal circumference of the grooves.
3, interlocking floor mats can be directly laid on the ground floor mats.
Edit this paragraph floor mat maintenance methods 1, daily use a special vacuum cleaner floor mat dust and dirt on the blanket surface (recommended daily removal).
2. Slowly roll up (or remove) the mat from inside the groove (or on the ground) to remove dirt from the groove (or on the ground). (Periodic removal)
3. When cleaning the floor mat surface, it is recommended to use the high pressure water gun to align the floor mat to thoroughly clean the residual dirt and sand.
4, the carpet surface reaches the service life,
Edit this paragraph Cleaning (1) It is recommended to use a vacuum cleaner every day (roller type vacuum cleaner recommended) to maintain the appearance of clean and decontamination functions.
(2) When washing EVC or polyethylene materials, it is only necessary to rinse with water.
(3) It is recommended to use a neutral detergent and carpet washing machine to clean the deep dirt on the carpet surface every week.
(4) In case of stubborn stains, use mild detergent and brush to wipe.
(5) Carpets and rubber can be replaced individually if worn.
(6) It is recommended to use 2 sets of floor mats that can be used alternately to extend the service life
Black coating is a type of Surface Treatment used to provide a durable, aesthetic and protective finish to metal parts. It is applied to a range of substrates, including steel, aluminum, and titanium, through various processes such as painting, chemical baths or physical deposition.
Black coating provides an attractive, matte finish that reduces glare and reflections. It is commonly used in industries such as automotive, aerospace, and firearms, where aesthetics and durability are essential. The black coating can also be used for functional purposes, such as to reduce friction and wear.
One of the most common types of black coating is black oxide. Black oxide is created through a controlled chemical reaction that forms a layer of black iron oxide on the surface of the metal. This process enhances the corrosion resistance of the substrate and provides a uniform and attractive black finish. Black oxide is also used to provide a matte black finish to gun parts, as well as to increase the conductivity of electrical components.
Another type of black coating is powder coating, which involves applying a dry powder to the surface of the substrate and baking it in an oven. This process creates a durable, weather-resistant finish that is resistant to damage from UV rays and other environmental factors. Powder coating is widely used in the automotive and manufacturing industries, where it provides a long-lasting, high-gloss black finish.
Finally, black coating can also be achieved through physical vapor deposition (PVD). This involves depositing a thin layer of black material onto the substrate through a vacuum chamber. PVD black coatings are very durable, and are often used in high-precision applications such as medical instruments and aerospace components.
In conclusion, black coating is a versatile and effective way to provide a durable, aesthetic, and protective finish to metal parts. Its visual appeal, corrosion resistance, and wear resistance make it a popular choice in a variety of industries and applications. Whether applied through chemical baths or physical vapor deposition, black coating plays an important role in enhancing the performance and longevity of metal parts.
Metal Black Coating,Black Powder Coated Metal,Black Zinc Plating,Black Oxide Metal
Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.autoindust.com