At present, most of the aqueous PU is mainly prepared by a self-emulsification method, and the hydrophilic group-containing PU is mainly used as a main curing component. When the coating film is dried, if the hydrophilic component cannot effectively enter the crosslinked network, the formed coating film is dried. It is easy to swell when exposed to water. In addition, it lacks crosslink density and high molecular weight which can be obtained by a two-component solvent-based PU coating film, and thus the water-dispersion, solvent resistance, heat resistance and gloss of these aqueous dispersion coating films are poor, and serious The ground limits the scope of its use. Therefore, it is often used to increase the crosslinking density of the coating film to improve the water resistance of the emulsion coating film. There are two commonly used crosslinking methods: one is to add a polyhydroxy compound having a functionality of more than 2 when synthesizing a PU prepolymer, directly forming a crosslinked PU prepolymer, and dispersing the above prepolymer well in water. And chain extension to form macromolecules, and finally form an emulsion.
This method is also called pre-crosslinking method. The disadvantage is that the viscosity of the prepolymer is easily increased, and it is difficult to disperse in water, which affects the stability of the emulsion. Active research on the screening and synthesis of novel cross-linking agents and multi-functional chain extenders has become one of the main ways to improve the physical and mechanical properties and water resistance of aqueous PU. Another method is the diplomatic method, which uses an anionic PU emulsion with a carboxyl group for cross-linking. The cross-linking reaction takes place on the carboxyl group of the PU molecule, with aziridine, carbimimine and metal salt compounds, which are carried out at room temperature. Cross-linking. Such a crosslinking agent is generally added when a PU emulsion is used, because the crosslinking reaction rate is fast, and a gel is generated in a short time to break the emulsion. The diplomatic law can successfully solve the hydrophilicity problem of PU emulsion coating film, but due to the addition of cross-linking agent, the composition of two-component finishing agent is inconvenient for construction, and this method is less used.
Low-E Laminated Glass, a kind of energy saving laminated glass, but the LOW-E only hard coat (online) LOW-E laminated glass can be used directly, mostly for windows. It can be processed into clear Low-e laminated glass, color tinted low-e laminated glass, colored Low-E laminated glass, low-e laminated Insulated Glass, be used for windows, door, building curtain walls, sunroom, that will effectively reduce your energy costs year-round, as well as offer your home much-needed protection from forced entry, severe weather conditions, as well as give consumers powerful sound control.
Laminated glass is produced when two or more glass lites are permanently bonded with one or more plastic interlayers (PVB) using heat and pressure. The glass and interlayers can be a variety of colors and thicknesses. Laminated glass is often called [safety glass" because it meets the requirements of various code organizations. Laminated glass can be broken, but the fragments tend to adhere to the plastic layer and remain largely intact, reducing the risk of injury. Laminated glass can be incorporated with heat-strengthened and Tempered Glass to further increase impact resistance.
Safety Building Glass, Laminated Safety Building Glass,Custom Laminated Glass, Low-E Laminated Glass
Shanghai Lead Glass Co.,Ltd , https://www.leadglazing.com