The red sandalwood museum exhibition Li Changchun furniture Li Ruihuan furniture also exists here

Recently, two pieces of furniture by Comrade Li Changchun were exhibited at the China Red Sandalwood Museum. It is reported that the two pieces of furniture in this exhibition were made by Li Changchun in the late 1960s and early 1970s. The relevant person in charge of the museum said that two pieces of furniture will be permanently collected in the museum. More than forty years of furniture, such as the north side of the third floor of the new rosewood museum, a wardrobe and a bookcase are displayed side by side. The wardrobe is about 1.6 meters high and is fitted with rectangular and fan-shaped mirrors on each side. A rectangular mirror can be used as a dressing mirror, and a fan mirror can be used as a vanity mirror. The cabinet surface is polished and the color of the patina is bright. The wardrobe door and drawers are more and the layers are evenly distributed. There is a row of storage compartments under the left side of the vanity mirror. On the two small doors of the storage compartment, there are two magpies standing on the branches of the plum blossoms and heads up. The bookcase is about 1.5 meters high and is divided into four layers. The upper three floors are the display layers, and the bottom one is the storage layer designed for the open doors. The display layer is fitted with a glass sliding door. Compared with the wardrobe, the overall design of the bookcase is more simple and simple. Open the two-piece drawer and pull the door, and move freely. Two pieces of furniture were 榫卯 structure at 15 o'clock yesterday, and many citizens came to visit the two pieces of furniture. Ms. Liu said that she felt that the two pieces of furniture were “simple and generous, and reflected the aesthetics and taste in the details.” Mr. Xiao, who is engaged in architectural design, stood at a position 5 meters away from the platform. “Look at the two pieces of furniture, Memory immediately returned to the 1970s.” Subsequently, Mr. Xiao approached the booth and placed his face close to the furniture. “These two pieces of furniture use a sturdy structure, which requires a certain level of professionalism.” Furniture is the symbol of the times. These two pieces of furniture were made by Li Changchun in the 1960s and 1970s. Mr. Sun Baizhen, director of the Red Sandalwood Museum Office, introduced that in the late 1960s, Li Changchun’s factory regularly unloaded the wood from the boxes that were sent to the factory and sent them to the workers for cooking. At that time, Li Changchun, who was in a poor family, selected some of the wood and made these two pieces of furniture. "The two magpies on the closet are also painted by him." Sun Baizhen said that compared with other precious exhibits in the museum, the two pieces of furniture are "not worth the money", but the purpose of exhibiting them is that homemade furniture is an era. symbol of. "Under economic conditions, homemade furniture was very common in that era. The value of these two pieces of furniture reflects both the characteristics of that era and the inheritance of the carpenter craftsmanship in China." These two pieces of furniture were in Chinese red sandalwood in May this year. The museum is on display and will be permanently stored in the museum. Li Ruihuan's homemade furniture is also located on the south side of the third floor of the museum's red sandalwood museum. There is a display of five pieces of furniture in a nearly 50 square meter exhibition hall. These five pieces of furniture are made by Comrade Li Ruihuan. The two bookcases on the left side of the exhibition hall were made by Li Ruihuan during the “Cultural Revolution” period. They were hand-made by the chopping wood. The two wardrobes on the right side were hand-made in the spare time when Li Ruihuan was the mayor of Tianjin. Sun Baizhen introduced that the Red Sandalwood Museum also preserved a considerable number of Li Ruihuan homemade furniture, most of which have been shipped to Guangzhou for display.

ESD SMT Splice Tape

With the requirements of PCB quality of the major electronic companies (such as Huawei, Foxconn, BYD, Skyworth, TCL and other companies) higher and higher, in order to reduce the impact of static electricity on electronic components, our company produces ESD SMT Splice Tape , Anti-static parameters in full compliance with SMT SMT ESD anti-static requirements.
First, the anti-static tape is divided into: Tape Anti-static SMT Splice Tape, all anti-static materials SMT Splice Tape
Second, the anti-static tape surface resistance of 10 to the 6th power of 10 to the 8th power
Third, the stripping voltage is less than 100 V at 30V or so
Fourth, the anti-static tape are high sticky tape, the original film itself anti-power technology, not because of anti-static requirements to reduce the tape's viscosity, the maximum degree of assurance Feida pass rate.
Fifth, SMT ESD Double Splice Tape, SMT ESD Single Splice Tape, Panasonic ESD SMT Splice Tape.
Color: SMT Black ESD SMT Splice Tape / SMT Yellow ESD SMT Splice Tape.

ESD SMT Splice Tape,ESD Special Splicing Tape,ESD Splicing Tape,ESD SMT Double Splice Tape

ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com