Tongliao production of carbon fiber cloth construction plan

Tongliao production of carbon fiber cloth construction plan

Tongliao uses special drums to roll the carbon fiber fabrics many times in the direction of the fiber manufacturers. Tel: 1591-0333-100 Mr. Lin】 quality assurance, cheaper prices . Integrity Welcome to inquire and negotiate ! [ sentence] Graphite is a crystal structure Tongliao believes in following the development of the entire social economy

Tongliao Carbon Fiber Cloth Construction Project Carbon Fibers Prepared from Asphalt and Carbon-Containing Gases Higher Degrees of Graphitization of Carbon Fibers Made from Polymers Carbon Fiber Cloths can be divided into 300 grams and 200 grams; normal specifications are: 100cm/200cm/300cm/500cm/150cm / 250cm / Width and special specifications can also be customized Due to market shortages, in recent years there has been "carbon fiber fever" in China, and many scientific research institutes and enterprises have started carbon fiber research or 1000-ton industrialization projects. Although there is a large demand for carbon fiber products in the domestic market, there is a great risk of blindly developing below-grade product categories, especially the existing product development has stagnated. The thickness of the carbon fiber sheet is reduced. The specific calculation method is described in the relevant part of the technical regulations. Carbon fiber fabric manufacturers, carbon fiber fabrics and supporting resins: other uses: sporting goods, industrial products and many other fields. Light weight, can be manipulated in a small space, the construction process is not affected. Concise and light: Compared with other reinforcement methods, the construction of stick steel reinforcement is clean, simple and convenient, and there is no wet homework on site. It can be used for structural reinforcement such as curves and nodes. The manufacture of carbon fiber cloth includes fiber spinning and thermal stabilization (pre-oxidation). Therefore, the strength of PAN-based carbon fibers in the domestic market is generally within the specified amount, and the modulus of elasticity is about 2.1x105 Mpa. The performance of the fiber is basically satisfactory. After the successful research and development of carbon fiber reinforced concrete repair technology, it will bring significant changes to the reinforcement and reconstruction technologies in the field of civil engineering. The use of carbon fiber reinforced concrete for repairing concrete structures will be superior, more efficient and more economical than conventional technologies. Can solve the traditional reinforcement methods can not solve the technical issues, with significant economic and social benefits.

Hammering into the bottom of the hole If you have any questions about the price of carbon fiber cloth; please contact the company for further information; get more information on the price of carbon fiber cloth. The above is the detailed information of the company that reinforced the carbon fiber cloth; it is provided by Yuanyuan Construction Technology Co., Ltd.; if you have any questions about the information of the company that reinforces the carbon fiber cloth; please contact the company for further information; obtain more information on the company that reinforces the carbon fiber cloth . Carbon; (1) carbon paper; [electricity] carbon rod [Compared with the advanced level of international advanced technology, China's technology started late, but with the rapid development of China's economic construction and transportation, existing buildings have Due to the fact that the design load standards were low at that time, historical issues were left behind. Due to changes in the use of functions, it is difficult for some buildings to meet the current requirements for the use of specifications and urgently require maintenance and reinforcement. The production of carbon fiber fabrics is completed without affecting the use of the product. Brushing primer: Weigh HL-601 (impregnated glue) A material and B material steel and concrete bonding surface according to the specified proportion of glue should be derusting, grinding Metal luster, if necessary, wash with anhydrous alcohol or copper propane. Welding: Fix the steel on the predetermined joint surface of the component and weld it as designed. The following steps shall be used to affix the carbon fiber board. The carbon fiber board shall be cut to the size required by the design, and the adhesive resin shall be formulated according to the process provided by the product supplier; the surface of the carbon fiber board shall be wiped clean to no dust.

The normal specification for the construction of carbon fiber cloth in Tongliao is: 100cm/200cm/300cm/500cm/Preventing the production of new cracks Carbon fiber cloth is suitable for reinforcement and seismic strengthening of concrete structures, masonry structures, and wooden structures in port engineering and water conservancy and hydropower projects. It is especially suitable for structural reinforcement such as curved surfaces and nodes. The strength requirement of grass-roots concrete shall not be lower than C15. 2. The construction shall be carried out under an ambient temperature of 5°C or above and shall be in conformity with the supporting resin. When the operating temperature is lower than 5°C, the supporting resin suitable for the low-temperature environment shall be used. Or use warming measures. The spinning process of PAN precursors for carbon fiber production includes dry spinning, wet spinning, and wet spinning. Currently, wet spinning and wet spinning are more commonly used. Tongliao production of carbon fiber cloth construction plan